What parts need to be checked for shipping container acceptance

The container will be strictly inspected before loading. However, it is
inevitable that some problems will occur in the container. If the problematic
container cannot be checked in time,

If there is an accident during transportation, the loss may be due to the
loss of the goods, and the serious consequences may even occur, and there may
even be casualties.

Therefore, strict inspection must be carried out before the container is
used, and inspection should also be carried out when the container is handed
over. So what are the inspections for the inspector? Follow steps with flat pack container house manufacturers.

The first point: the inspection of the outside of the container is mainly to
inspect the six sides of the box, for example, to check whether there is any
damage on the outside, whether there is any deformation, and whether there are
cracks, etc., if If necessary, it should be repaired in time.

The second point: to carry out internal inspections, mainly to inspect the
inside of the box in six aspects to see if there are any water leaks, light
leaks, stains, etc.

The third point: check the box door to see if it is intact, whether the
narcissus are watertight around the door, whether the door lock is intact, and
whether the box door can be opened repeatedly.

The fourth point: to carry out clean inspection, as long as some residues in
the box, contaminants, and whether there is water and moisture, etc., if there
is a non-conformity, then it must be cleaned, serious Replace the container.

Fifth point: For the inspection of accessories, such as the reinforced ring
connection status of the container, there are also some pillars and extended
structures of the container.